E TEAM study


e-team_poster

O poslijediplomskom studiju E-TEAM

 

E-TEAM je kratica dvogodišnjeg magistarskog studija u području tekstilnog inženjerstva pod punim nazivom “European Masters Programme in Textile Engineering”, kojeg od 1997. god. organizira i izvodi AUTEX (European Association of Textile Universities, www.autex.org ) potpunom potporom Europske unije iz programa Socrates (DG XXII-Directorate General for Education and Culture).

 

Nastava studija E-TEAM  traje tri semestra a svaki semestar se izvodi na drugom europskom sveučilištu, koji je član AUTEX-a. U četvrtom semestru izrađuje se magistarski rad na sveučilištu mentora.

 

U zimskom semestru akad. god. 2008/2009 ovim studijem će koordinirati Tekstilno-tehnološki fakultet. Nakon uspješne aktivnosti Prof. dr. sc. Ane Marije Grancarić, udruženje AUTEX joj je povjerilo koordinaciju ovog semestra.

 

e-team_logoe-team_poster

 

 

 

 

 

European Masters Programme in

Textile Engineering

 

A joint enterprise between Textile Departments

of major European Universities

and College of Textiles, NC State University, USA

This two-year course (20072009) will be followed at three or four

different locations within the group of participating universities

 

 

Venue Autumn Semester 2007

Ghent, Belgium

 

Local coordinator:

Prof. Dr. P. Kiekens

e-mail: paul.kiekens@UGent.be

Fax: +32 9 264 58 46

 

Venue Spring Semester 2008

Terrassa, Spain

 

Local coordinator:

Prof. Dr. F.J. Carrión-Fité

e-mail: carrion@etp.upc.edu

Fax: +34 93 739 81 01

 

Venue Autumn Semester 2008

Zagreb, Croatia

 

Local coordinator:

Prof. Dr. A.M. Grancaric

e-mail : amgranca@ttf.hr

Fax : +385 1 48 77 355

 

Participating universities

Universiteit Gent (Belgium)

University of Zagreb (Croatia)

Technical University of Liberec (Czech Republic)

Tampere University of Technology (Finland)

ENSAIT Roubaix (France)

Ecole Nationale Supérieure d’Ingénieurs Sud Alsace –  ENSISA (France)

RWTH Aachen (Germany)

Technische Universität Dresden (Germany)

Technological Education Institute of Piraeus (Greece)

Politecnico di Torino (Italy)

Kaunas University of Technology (Lithuania)

Universiteit Twente (The Netherlands)

Technical University of Lodz (Poland)

Universidade do Minho (Portugal)

University of Maribor (Slovenia)

Universitat Politècnica de Catalunya (Spain)

Högskolan i Boras (Sweden)

University of Manchester (UK)

Heriot Watt University (Scotland, UK)

North Carolina State University, CoT (USA)

 

Thesis

Spring semester 2009, at one of the participating universities

General information Autex -secretariatp/a Universiteit Gent Department of TextilesTechnologiepark 9079052 Zwijnaarde (Gent)

BELGIUM

URL : http://textiles.UGent.be/e-mail : paul.kiekens@UGent.beTel. : +32 (0)9 264 57 50Fax : +32 (0)9 264 58 46 
General coordinator :                     Prof. Dr. Paul KIEKENS, Gent (Belgium)

 

e-team_poster

 

 

 

 

 

 

ttf-study

E-TEAM2007-2009 Programme -Third Semester

 University of Zagreb, Faculty of Textile Technology

E-TEAM Teachers

Week/Arrival/ Departure

Coordinator: Ana Marija Grancaric; Ph. D. Professor

 

Name and Surname

Course

Institution

 

Week

Arrival/

DEPATURE

Prof. Quido BelforteCourse: Advanced and Specialised Textile Processing – Mechanical (I) (3 credits)   

Politecnico di Torino, Department of Materials Science and Technical Engineering, Torino, Italy;

http://www.polito.it/dipartim/matchimi/itindex.html

37

08.09./

10.09.

Dr. Carmen Visconte Course: Advanced and Specialised Textile Processing – Mechanical (II) (3credits)   

Politecnico di Torino, Department of Materials Science and Technical Engineering, Torino, Italy;

http://www.polito.it/dipartim/matchimi/itindex.html

 

37

10.09./

12.09.

Prof. Sigitas Stanys  Course: Advanced and Specialised Textile Processing – Mechanical (III) (3 credits)  

 

Kaunas University of Technology – Faculty of Design and Technologies, Kaunas, Lithuania

http://www.textiles.ktu.lt

 

38

14.09./

19.09

Prof. Raul FangueiroCourse: Advanced and Specialised Textile Processing – Mechanical (IV) (3 credits)  

 

University of Minho – School of Engineering, Guimaraes, Portugal;

http://www.det.uminho.pt

39

19.09./

26.09.

Prof. Kenneth Tingsvik:Course: Ecological and Environmental Aspects (3 credits)

 

University College of Boras – School of Textiles

Boros, Sweden

http://www.hb.se

40

28.09./

03.10.

Prof. Savvas Vassiliadis:Course: Industrial Information Systems (3 credits) – is

 

TEI Piraeus – Technological Education Institute of Piraeus, Athens, Greece

http://www.teipir.gr

41

05.10./

10.10.

Prof. Mario de AraujoCourse: Supply Chain Management (3 credits

University of Minho, School of Engineering, Guimaraes, Portugal

http://www.det.uminho.pt

42

13.10./

17.10.

Study and Examination period

43

20.10./

17.10.

Study and Examination period

44

27.10./

17.10.

Prof. Giorgio RoveroCourse: Quality and Environmental Management (3 credits) 

Politecnico di Torino, Department of Materials Science and Technical Engineering, Torino, Italy

http://www.polito.it/dipartim/matchimi/itindex.html

 

45

03.11./

07.11.

Prof. Heikki MattilaCourse: Management, Logistics and Distribution (3 credits)Tampere University of Technology, Tempere, Finland

http://www.tut.fi/kmt/en

45

10.11./

14.11.

Mrs. Jayne SmithCourse: Clothing Construction Techniques (3 credits)

 

Heriot Watt University, – School of Textiles and Design

Netherdale – Galashiels, Scotland, U.K.

http://www.hw.ac.uk/

 

47

16.11./

21.11.

Prof. Mike Bailey,Course: International Markets for Textiles & Clothing (3 credits) 

University of Manchester

School of Materials – Textiles and Paper Group http://www.manchester.ac.uk

48

23.11./

28.11.

Study and Examination Period for 3rd semester 

49

01.12. /

05.12.

Study and Examination Period for 3rd semester 

50

08.12./

15.12.

2nd call examinations for the 3rd semester

51

19.12. /

22.12

 

e-team_poster

 

 

 

 

 

E-TEAM

 

PROGRAMME 2007-2009

 

Session 2007-2008

 

Autumn Semester :    Ghent University, Belgium

September – December 2007

 

week 36 / 2007                        arrivals and registration; introduction, practical information

 

week 37 (10/9)             High Technology Fibres (3 credits) – Prof. Nousiainen

week 38 (17/9)             High Performance Fibres (3 credits) – Prof. Kiekens

week 39 (24/9)             Biomaterials (3 credits) – Prof. Sam Hudson

week 40 (01/10)           Biotechnology (3 credits) – Dr. Nierstrasz

week 41 (08/10)           Composites (3 credits) – Prof. Harlin

week 42-44 (15/10)       Study and examination period

week 45 (05/11)           Analytical Techniques (3 credits) – Prof. Carr

week 46 (12/11)            Creative Textile Design (3 credits) – Prof. Masajtis

week 47 (19/11)            Mechanics of Textile Materials (3 credits) – Prof. Vitkauskas

week 48 (26/11)           Design Management (3 credits) – Dr. Studd / Dr. Sinha

week 49 (03/12)            Automation and Process Control (3 credits) – Prof. Gniotek

week 50-51 (10/12)       Study and examination period for 1st semester

 

Spring Semester :      UPC Terrassa, Spain

                                    February – June 2008

 

week 6+7 (04/02/2008) Technical Textile Manufacturing Technology (6 credits) – Dr. U. Köckritz + Prof. Gries / Dr. Veit

week 8 (18/02)              Medical, Transportation and Construction Textiles (3 credits) – Prof. Dréan

week 9 (25/02)             Applications of Technical Textiles (3 credits) – Prof. Krucinska

week 10 (03/03)            Computer Aided Textile Design and Manufacturing (3 credits) – Prof. Krzywinski

week 11+12                 Examination period

week 13+14 (24/03)      Easter Holiday

week 15 (07/04)           Functional Textile Materials (3 credits) – Prof. Van Langenhove

week 16 (14/04)            Applied Textile Process Engineering (3 credits) – Prof. Warmoeskerken

week 17-18 (21/04)       Advanced and Specialised Textile Processing – Dyeing & Finishing (6 credits) – Prof. Carrión-Fité, Prof. Prasil

week 19 (05/05)            Functional Finishing (3 credits) – Prof. Almeida

week 20-22 (12/05)       Study and examination period for 2nd semester

week 23-25 (02/06)       Study period and 2nd call examinations

 

 

Session 2008-2009

 

Autumn Semester :    University of Zagreb, Faculty of Textile Technology

                                   September – December 2008

 

week 37-39 (08/09/08)  Advanced and Specialised Textile Processing – Mechanical (9 credits) – Prof. Testore, Prof. Stanys, Prof. Belforte, Prof. Fangueiro

week 40 (29/09)           Clothing Construction Techniques (3 credits) – Mrs. Jayne Smith

week 41 (06/10)           Industrial Information Systems (3 credits) – Prof. Vassiliadis

week 42 (13/10)           Ecological and Environmental Aspects (3 credits) – Prof. Tingsvik

week 43+44 (20/10)      Study and examination period

week 45 (03/11)           Quality and Environmental Management (3 credits) – Prof. Rovero

week 46 (10/11)           Management, Logistics and Distribution (3 credits) – Prof. Mattila

week 47 (17/11)            Supply Chain Management (3 credits) – Prof. de Araújo

week 48 (24/11)           International Markets for Textiles & Clothing (3 credits) – Dr. Bailey

week 49+50 (01/12)      Study and examination period for 3rd semester

week 51 (15/12)           2nd call examinations for the 3rd semester

 

Spring Semester : thesis at one of the participating universities : January – June 2009

Thesis has to be submitted by May 31st.